www.youtube.com/watch?v=bgudrRyXcyQ

www.youtube.com/watch?v=mXfUbFR-x7g

The first meetup of the weekly RKC Houston meet. I couldn’t stay too long; but the photos that I was able to take are here. Small meet in the beginning, as most people showed up and left. The crowd changed significantly as the hours wore on, so there was a nice spread of cars. However, since I was only able to stay for a 20 minute window, I wasn’t able to see everything.

A smattering of Subarus, a few Evo’s and a boosted S2k all met up at Underground Graphics in Houston to do some early Saturday meeting, greeting, and drinking. Some true beasts were on show, such as the hot Forester XT, a supercharged Honda S2000, and two smoking Lancer Evolutions. Keith from AWDTuning.com did a few road tunes, and Mike from Dent Wizard was on hand to work his magic with some truely incredible results. Great people all around, and some great cars to be seen. Click “Read More” to see all the pictures, or click here to see the thread on Nasioc!

I stumbled on to WarmAndSCSI’s turbo V6 Galant build thread. Interesting stuff, along with pictures of transmission carnage and dyno sheets, along with lots of buildup pictures. Click here to see the thread on Mitsubishi Powered Forums or click “Read more” to see all 153 pictures along with the complete mod list!

Here are the pictures, complete car mod list after the images!

Cylinder Block

6G72 3.0 L V6 – 100% of tuning and assembly labor done my myself, raw machining done by Casey’s Machine in WVC, UT to my specs
3SX custom forged rods
ARP main studs
ARP ARP2000 rod bolts
Balanced rotating assembly (5-7 in-lb of unbalance @ 8000 RPM)
Clevite 77 main bearings
Clevite 77 rod bearings
Clevite 77 thrust washers
CP Forged 2618 alloy pistons, 8.8:1 static CR, 1.00 mm overbore
OEM Forged Crank (brand new from Mitsubishi), balanced (as stated before) and chamfered
Sealed Power Rings gapped to 0.024″ up top, 0.030″ second ring

Cylinder heads
6G72 SOHC 24 V cylinder heads w/ stock cams
ARP undercut head studs
Mild port & polish
Refreshed w/ 3-angle valve job

Forced induction
750 HP FMIC – approx 26x12x4″
eBay 2.5″ intercooler piping
Garrett GT3582R aka GT35R turbocharger with 2.5″ T31 0.82 A/R hotside
Garrett turbine heat shield
Hallman Pro MBC
HKS Super SQV Blow Off Valve
HKS Super Mega Flow filter in sunset orange
Injen 2.5″ upper intercooler pipe for Evo VIII
NAPA T-bolt clamps
Snow Performance Boost Cooler Stage 2
TiAL 38 mm wastegate
XTech turbo exhaust piping, T03 flange

Fuel
3000GT VR-4 fuel rail
3SX -6 AN fuel fittings
Ford Racing/Bosch Green-Top 42# injectors
Generic AFPR
Stainless steel fuel lines in -6 AN w/ black hose ends
Walbro 255 L/h fuel pump

Ignition
Magnecor KV85 custom-crimped coil wire
Magnecor KV85 spark plugs wires
Modified stock distributor cap with MSD coil tower
MSD Blaster HVC II coil
MSD 6A ignition
NGK BKR7E spark plugs gapped @ 0.025″
Sun Auto Hyper Ground system

Engine management
AEM UEGO wideband
Fixed barometer signal (for Speed Density setup)
GM open-element IAT sensor (for Speed Density setup)
GReddy E-Manage Ultimate (set up in MAF-less Speed Density mode)
GReddy pressure sensor (for Speed Density setup)
MAF delete (for Speed Density setup)

Cooling
170 Degree Thermostat
CSF 2-row 2779 radiator
HKS radiator cap (1.1 bar)
OBX silicone radiator hoses

Exhaust
2.5″ downpipe, 4-bolt flange
3″ mandrel-bent “cat”-back
Aero 3″ resonator
Catalytic converter delete
Magnaflow Race Series 3″ inlet, 4″ tip oval muffler

Other bolt ons
Air conditioning delete
Diamante 65mm throttlebody
Eclipse GTS intake plenum
EGR delete
Fidanza lightweight aluminum flywheel (9.5 lb)
Golden Eagle vacuum manifold
HKS oil filler cap
K&N Performance Gold oil filter HP-1004
PCV delete
Power steering delete
Red Line 10W-40 fully synthetic oil
Turbo XS catch can with one 1/2″ vent hose from each valve cover

Transmission
Energy suspension front and rear mounts
F5M51 manual swap
GReddy counterweight shift knob
Ingalls Stiffy torque damper
Kartboy shifter base bushings
Kartboy shifter linkage bushings
Megan Racing short shifter
SPEC Stage 3 clutch

Suspension
D3 Designs mid chassis brace
D3 Designs rear chassis braces
Eclipse GT OEM front strut tower bar
Addco rear anti-sway bar – 22 mm
Megan Racing rear lower tie bar (solid)
Megan Racing Street coilovers
Mevotech front endlinks (MUCH thicker than stock and better balljoints)
Whiteline adjustable rear endlinks (fronts from an STi)

Wheels & tires
Enkei ZR-1 Wheels in 17×7.5 +40 mm offset
Goodyear Eagle F1 GS-D3 in 225/45ZR17
H&R TRAK+ 5 mm hubcentric spacers up front (brake clearance)

Braking
ABS removed by means of accidentally severing the ABS harness (whoops)
Ksport front big brake kit
- 330 mm (13 in) 2-piece rotors
- 8 piston calipers anodized in orange
- Ceramic street pads
- Stainless steel brake lines

Exterior
3rd Gen JDM tails
02-03 Black housing headlights
Carbon fiber Mitsu emblem
Cleared corner reflectors
Custom carbon fiber-wrapped rear trunk garnish
Custom carbon fiber-wrapped USDM grille
Daytona Sunset Orange Metallic Paint (Corvette C6 color)
FormulaONE Tint
Halo 8000 K 9003/H4 HID conversion
OEM GTZ spoiler
Painted valve cover
Sylvania SilverStar turn signal bulbs

Electronics
Auto Meter Carbon Fiber Boost Gauge
Auto Meter Carbon Fiber Oil Pressure Gauge
Beltronics Vector 995 Radar Detector
Optima Red Top Battery
Pioneer Premier DEH-680MP Head
Pioneer 4-way 6.5″ fronts
Pioneer 4-way 6×9 rears
Python 700 2-Way security system